EARTH MOVING EQUIPMENT/TRANSPORT VEHICLES
- Poclains EX 200
- ESCORTS JCB 3D Excavator/loader
- Tippers / Dumpers
- Excavators
- Dozers
- Road rollers 8/10MT
- Vibro Rollers
PUMPS
- Submersible pumps
- Mono Block pumps 3/5 H.P.
- Jet pumps - 70 to 180 ft. suction
- Airlift pumps - 250 ft. suction
- Centrifugal pumps single stage
- Centrifugal pumps multi stage
CENTERING/SHUTTERING MATERIALS
- Centering Sheets (Steel & Plywood)
- Props &Spans
- Cuplocks
- HD2P Props
- Scaffolding pipes with clamps
- Cribs
LEVELLING EQUIPMENT
- Total Station
- Theodelite
- Dumpy Levels
TESTING
- Compression Testing machine - AIMIL
- Cube moulds
- Slump cones
- Sieve analysis sets
- CONCRETE BATCHING PLANTS
- TRANSIT MIXERS
- MOBILE BATCHING PLANTS
- CONCRETE MIXERS 10/7 cft.
- VIBRATORS 40/60mm needles
- BUILDER HOISTS
- WEIGH BATCHERS
- GENERATORS - 36/15 K.V.A
- TOWER CRANES
Laboratory testing instruments
- Balances
i. 7 Kg. to 10 Kg. capacity, semi-self indicating type – accuracy 10 gm.-1No. ii. 500 gm. Capacity, semi-self indicating type – accuracy 1 gm.- 1 No. iii. Pan balance – 5 Kg. capacity – accuracy 10 gms.-1 No. - Ovens–electrically operated, thermostatically controlled upto 1100 C–sensitivity 10 C. – 1 No.
- Sieves : as per IS 460 – 1962.
i. I.S. sieves – 450 mm internal dia, of sizes 100mm, 80 mm, 63 mm, 50mm, 40 mm, 25mm, 20 mm, 12.5 mm, 10 mm, 6.3mm, 4.75 mm, 2.36mm complete with lid and pan. – 1 Set ii. I.S. sieves - 200 mm internal dia (brass frame) consisting of 2.36 mm, 1.18 mm, 600 microns, 425 microns, 300 microns, 212 microns, 150 microns, 90 microns, 75 microns with lid and pan. – 1 Set - Sieve shaker capable of 200 mm and 300 mm dia sieves, manually operated with timing switch assembly - 1 No.
- Equipment for slump test–slump cone, steel plate, tamping rod, steel scale, scoop-2sets
- Dial gauges, 25 mm travel – 0.01 mm / division least count – 2 Nos.
- 100 tones compression testing machine, electrical cum manually operated. –1 No.
- Graduated measuring cylinders 200 ml capacity – 6 Nos.
- Enamel trays (for efflorescence test for bricks).
i. 300 mm X 250 mm X 40 mm – 2 Nos. 10 Set ii. Circular plates of 2850 mm dia – 4 Nos.
Field testing instruments
- Steel tapes – 3 m.
- Vernier Calipers.
- Micrometer screw 25 mm gauge.
- A good quality plumb bob.
- Spirit level, minimum 30 cms long with 3 bubbles for horizontal vertical.
- Wire gauge (circular type) disc.
- Foot rule.
- Long nylon thread .
- Rebound hammer for testing concrete
- Dynamic penetrometer.
- Magnifying glass
- Screw driver 30 cms long
- Ball pin hammer, 100 gms.
- Plastic bags for taking samples
- Moisture meter for timber
- Earth resistance tests (for Electrical Divisions)
- Meggar (for Electrical Divisions)
- Total station
(An ISO 9001 : 2015 Certified Company)
Copyright © 2024 SBEC ® All rights reserved.
COPYRIGHT & TERMS | PRIVACY POLICY | SITEMAP